Smooth Release Film Faced Plywood Reusable Wear Resistant 1220×2440mm
Product Details
| Size: | 1220×2440mm (4×8ft),915×1830mm Produced On Demand | Main Available Thickness: | 12mm, 15mm, 18mm, 21mm (18mm Is The Best-selling Specification For Global Export) |
|---|---|---|---|
| Moisture Content: | 8%–12% (To Avoid Deformation Caused By Moisture During Ocean Shipping) | Bonding Strength: | ≥0.7MPa |
| Thickness Tolerance: | ±0.3mm | Surface Flatness: | ≤0.8mm |
| Film Weight: | 120g/㎡, 150g/㎡, 180g/㎡, 220g/㎡ | Reusable Cycles: | Phenolic Plywood: 8–25 Times; Melamine Plywood: 5–10 Times; PP Plastic Film Plywood: ≥30 Times |
| Highlight |
Smooth Release Film Faced Plywood,1220x2440mm Film Faced Plywood,Wear Resistant Filmfaced Plywood |
||
Product Description
Film Faced Plywood Introduction
Film Faced Plywood, also called black phenolic coated plywood, is made by pressing multiple layers of poplar or eucalyptus veneers crosswise, then hot-pressing both sides with a black waterproof film. The boards are waterproof and wear-resistant, resistant to glue failure and deformation. After removing the formwork, the concrete surface is smooth and flat, allowing for exposed concrete pours without needing a second plastering step. The boards are large, moderately heavy, and highly reusable, making them suitable for various concrete construction projects like high-rise buildings, bridges, tunnels, and basements. They help reduce labor and material costs and are the mainstream choice for construction formwork.
Film Faced Plywood Classification
Black & Brown Phenolic Film Plywood (PF glue)
covered with 120–220g/㎡ phenolic paper and bonded with WBP waterproof glue. Resists rainwater immersion with service cycles from 8 to 25 times, the dominant export item for Middle East, Africa and Southeast Asia markets.
Film Faced Plywood Parameters
| Item | Standard Data |
| Size | 1220×2440mm (4×8ft),915×1830mm Produced on Demand |
| Main Available Thickness | 12mm, 15mm, 18mm, 21mm (18mm is the best-selling specification for global export) |
| Moisture Content | 8%–12% (To avoid deformation caused by moisture during ocean shipping) |
| Bonding Strength | ≥0.7MPa, No delamination after boiling water immersion |
| Thickness Tolerance | ±0.3mm (Superior to the national standard of ±0.5mm) |
| Surface Flatness | ≤0.8mm per square meter |
| Film Weight | 120g/㎡, 150g/㎡, 180g/㎡, 220g/㎡ (Higher film weight brings better abrasion resistance and more reuse cycles) |
| Adhesive Type | Marine-grade WBP Phenolic Waterproof Glue / MR Melamine Glue |
| Reusable Cycles | Phenolic Plywood: 8–25 times; Melamine Plywood: 5–10 times; PP Plastic Film Plywood: ≥30 times |
Film Faced Plywood Advantages
- The construction turns out well The double-sided black phenolic film is dense and smooth, so concrete doesn't stick to the board. Demolding is easy without rough spots or honeycombing. The poured surface is flat and shiny, achieving a fair-faced concrete look, eliminating the need for wall plastering, and saving labor and mortar.
- Waterproof and moisture-resistant Laminated and waterproof, it won't easily absorb water, swell, peel, or lose glue during rain, in basements, or underwater construction, and it's not prone to warping or deforming.
- High turnover, great value for money Wear-resistant and scratch-proof, can be reused 8–15 times with normal use, far more than ordinary plain boards and red templates.
- Improving construction efficiency Moderate weight, easy for workers to carry, simple to cut and drill, suitable for beams, columns, walls, pile caps, and various bridge structures.
- Suitable for a wide range of situations Applicable to all cast-in-place concrete projects like high-rise buildings, villas, basements, garages, bridges, tunnels, water conservancy utility tunnels, and factories; can be used reliably on both high and low temperature or damp construction sites.
- Additional cost-saving advantage No need for plastering, shortening the overall construction time; fewer board surface damages, low waste rate; the amount of release agent can be greatly reduced, further cutting down on accessory costs.
Film Faced Plywood Construction
Film Faced Plywood Workshop
Film Faced Plywood Packing
Product Highlights
Film Faced Plywood, also called black phenolic coated plywood, is made by pressing multiple layers of poplar or eucalyptus veneers crosswise, then hot-pressing both sides with a black waterproof film.
PP Hollow Construction Formwork Good Smooth Concrete Finish Reusable Many Times Easy To Demold
PP hollow construction formwork is a new generation of eco-friendly building construction formwork. Made from polypropylene polymer material and a hollow structure process, it can replace traditional wooden formwork, plywood, and steel formwork.
High Quality Export PVC Formwork With Good Water Clarity And High Turnover Rate
PVC formwork is made from polyvinyl chloride as the base material, mixed with modified additives and produced through extrusion molding. It combines advantages such as being waterproof and moisture-proof, dimensionally stable, smooth-surfaced, lightweight, and easy to work with.
Export PVC Formwork Templates Waterproof And Moisture Proof Customizable
PVC formwork is light, strong, impact-resistant, wear-resistant, waterproof, corrosion-resistant, and dimensionally stable. It's perfect for pouring concrete for walls, beams, slabs, bridges, culverts, and more, making it super versatile.
Construction Black Film Faced Plywood Easy To Demold Anti Crack
Construction black formwork belongs to film-faced wooden construction formwork. The surface is coated with a black, high-strength phenolic waterproof film, and the boards are tightly glued with sufficient hardness.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
