Clear Water Black Phenolic Plywood High Turnover Customizable 18mm
Product Details
| Size: | 1220×2440mm (4×8ft),915×1830mm Produced On Demand | Main Available Thickness: | 12mm, 15mm, 18mm, 21mm (18mm Is The Best-selling Specification For Global Export) |
|---|---|---|---|
| Moisture Content: | 8%–12% (To Avoid Deformation Caused By Moisture During Ocean Shipping) | Bonding Strength: | ≥0.7MPa |
| Thickness Tolerance ±0.3mm (Superior To The National Standard Of ±0.5mm): | ≤0.8mm Per Square Meter Film Weight | Film Weight: | 120g/㎡, 150g/㎡, 180g/㎡, 220g/㎡ |
| Highlight |
Black Phenolic Plywood 18mm,Customizable Black Phenolic Plywood,Clear Water Filmfaced Plywood |
||
Product Description
Film Faced Plywood Introduction
Black film faced plywood, officially called black phenolic film-faced plywood, is a commonly used concrete molding form in construction. It combines a black waterproof film on the surface with a solid wood plywood base, giving it high reusability, smooth concrete finishes, and no need for plastering. It's widely used in all kinds of building, municipal, and bridge projects.The finished boards have all four edges coated with a special waterproof edge-sealing paint to seal the cut edges and gaps, preventing moisture from causing delamination, warping, or glue failure. Complete edge sealing and an even paint finish are basic requirements for a qualified product.
Film Faced Plywood Classification
Black & Brown Phenolic Film Plywood (PF glue)
covered with 120–220g/㎡ phenolic paper and bonded with WBP waterproof glue. Resists rainwater immersion with service cycles from 8 to 25 times, the dominant export item for Middle East, Africa and Southeast Asia markets.
Film Faced Plywood Parameters
| Item | Standard Data |
| Size: | 1220×2440mm (4×8ft),915×1830mm Produced on Demand |
| Main Available Thickness | 12mm, 15mm, 18mm, 21mm (18mm is the best-selling specification for global export) |
| Moisture Content: | 8%–12% (To avoid deformation caused by moisture during ocean shipping) |
| Bonding Strength | ≥0.7MPa, No delamination after boiling water immersion |
| Thickness Tolerance | ±0.3mm (Superior to the national standard of ±0.5mm) |
| Surface Flatness | ≤0.8mm per square meter |
| Film Weight | 120g/㎡, 150g/㎡, 180g/㎡, 220g/㎡ (Higher film weight brings better abrasion resistance and more reuse cycles) |
| Adhesive Type | Marine-grade WBP Phenolic Waterproof Glue / MR Melamine Glue |
| Reusable Cycles | Phenolic Plywood: 8–25 times; Melamine Plywood: 5–10 times; PP Plastic Film Plywood: ≥30 times |
Film Faced Plywood Advantages
- High Cycle Reusable Normally rotates 10-20 times,Compared to traditional red formwork and bamboo plywood, the cost per use is much lower, making it a great value for large-scale construction sites.
- No Secondary Plaster After the regular walls, beams, and columns are formed, there's no need to do a second layer of cement mortar for leveling—you can go straight to painting, tiling, installing the ceiling, and other follow-up work.
- Waterproof, corrosion-resistant, and weather-resistant Not afraid of rain or construction water accumulation, the advantages for basements, foundation pits, and rainy season construction are obvious,Resistant to the alkaline corrosion of cement slurry, won't get corroded or powdery even after long-term contact with concrete.
- Excellent workability Can be cut with a regular chainsaw, after nailing and removing nails, the boards are not prone to cracking, and the formwork is solidly reinforced.
- Structurally stable, not easy to deform or crack The high-temperature and high-pressure gluing process makes the board very sturdy, so during pouring and vibrating, there’s no local bulging, cracking, or leaking of slurry.
Film Faced Plywood Construction
Film Faced Plywood Workshop
Film Faced Plywood Packing
Product Highlights
Black film faced plywood, officially called black phenolic film-faced plywood, is a commonly used concrete molding form in construction. It combines a black waterproof film on the surface with a solid wood plywood base, giving it high reusability, smooth concrete finishes.
PP Hollow Construction Formwork Good Smooth Concrete Finish Reusable Many Times Easy To Demold
PP hollow construction formwork is a new generation of eco-friendly building construction formwork. Made from polypropylene polymer material and a hollow structure process, it can replace traditional wooden formwork, plywood, and steel formwork.
High Quality Export PVC Formwork With Good Water Clarity And High Turnover Rate
PVC formwork is made from polyvinyl chloride as the base material, mixed with modified additives and produced through extrusion molding. It combines advantages such as being waterproof and moisture-proof, dimensionally stable, smooth-surfaced, lightweight, and easy to work with.
Export PVC Formwork Templates Waterproof And Moisture Proof Customizable
PVC formwork is light, strong, impact-resistant, wear-resistant, waterproof, corrosion-resistant, and dimensionally stable. It's perfect for pouring concrete for walls, beams, slabs, bridges, culverts, and more, making it super versatile.
Construction Black Film Faced Plywood Easy To Demold Anti Crack
Construction black formwork belongs to film-faced wooden construction formwork. The surface is coated with a black, high-strength phenolic waterproof film, and the boards are tightly glued with sufficient hardness.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
